918-200-0000
General Title

OAR 918, division 200 shall be known and may be cited as the “Amusement Ride and Device Specialty Code.”

[Publications: Publications referenced are available from the agency.]

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
DC 13-1982, f. 4-21-82, ef. 4-30-82, Renumbered from 814-060-0000

918-200-0005
Definitions

As used in this code, unless the context requires otherwise:

(1) “Administrator” means the administrator of the Building Codes Division.

(2) “Alterations/modifications of an amusement ride or device” means any physical change to the structure or mechanism that materially changes the manufacturer’s original design or affects the function, capacity or operation, in any manner.

(3) “Amusement park” means a tract or area used principally as a permanent location for rides or devices or both.

(4) “Carnival” means one or more amusement rides or devices operated in a temporary location for profit of the owner or operator.

(5) “Division” means the Building Codes Division of the Department of Consumer and Business Services.

(6) “Equipment” means and includes all types of amusement rides, machines, machinery, devices, safeguards and protective facilities used in connection with the operation and maintenance of amusement rides.

(7) “Exit” means a doorway or other opening affording safe access from an amusement ride to an open area.

(8) “Inspections” means:

(a) “Annual Inspection” is the official inspection of a ride or device prior to issuance of an annual operating permit;

(b) “Reinspection” is an inspection of a ride or device after a defect or deficiency is corrected;

(c) “Unscheduled Inspection” is any inspection which is not an annual inspection or reinspection.

(9) “Inspector” means a qualified person authorized by the Division to inspect amusement rides or employed, or otherwise authorized, by an insurance company to inspect rides insured by the company.

(10) “Major Alteration” means a change in the type or capacity of an amusement ride or device or a change in the structure or mechanism that materially affects its function or operation. This includes, but is not limited to, changing its mode of transportation from non-wheeled to a truck or flat-bed mount, and changing its mode of assembly or other operational functions from manual to mechanical or hydraulic.

(11) “Operator” means a person who owns or manages or has the duty of managing the operation of one or more amusement rides and devices.

(12) “Permit (to Operate an Individual Ride or Device)” means a permit issued by the division confirming the annual inspection has been performed and the individual ride or device meets the rules established by the division for its operation in this state.

(13) “Ride Operator” means a person controlling or causing the amusement ride or amusement device to go and stop and perform its function. A “ride operator” may be the operator’s employee.

(14) “Stop Order” means a written order requiring the specified amusement ride not be operated until required repairs, changes, or alterations are completed to the satisfaction of the inspector.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
BCD 15-1998, f. 9-30-98, cert. ef. 1-1-99
BCD 10-1994, f. 4-25-94, cert. ef. 5-1-94
BCD 1-1994, f. 1-14-94, cert. ef. 2-1-94
BCA 21-1992, f. 12-3-92, cert. ef. 12-4-92
BCA 9-1992(Temp), f. 5-28-92, cert. ef. 6-1-92
DC 13-1982, f. 4-21-82, ef. 4-30-82, Renumbered from 814-060-0020

918-200-0015
Scope

The provisions of this code shall apply to all amusement rides and devices defined in ORS 460.310 and to operators and inspectors of amusement rides. This code does not apply to games or concessions and their associated structures or to pony rides or similar animal rides or amusement devices designed to accommodate one to four children, such as coin operated machines which do not require an attendant on site and are not ordinarily found within an amusement park or carnival.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
BCD 15-1998, f. 9-30-98, cert. ef. 1-1-99
BCD 1-1994, f. 1-14-94, cert. ef. 2-1-94
DC 13-1982, f. 4-21-82, cert. ef. 4-30-82, Renumbered from 814-060-0010

918-200-0020
Uniformity

This code shall be applicable and uniform throughout this state and in all municipalities. No municipality shall enact or enforce any ordinance, rule or regulation relating to the same matters encompassed by these rules unless authorized by the Administrator.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
BCD 15-1998, f. 9-30-98, cert. ef. 1-1-99
BCD 10-1994, f. 4-25-94, cert. ef. 5-1-94
BCD 1-1994, f. 1-14-94, cert. ef. 2-1-94
DC 13-1982, f. 4-21-82, ef. 4-30-82, Renumbered from 814-060-0015

918-200-0025
Permits, Inspections and Appeals

(1) All amusement rides and amusement devices must be inspected prior to the issuance or renewal of an operating permit. Any defects identified during the inspection that are dangerous to health or safety must be corrected before the inspector issues an inspection report. Defects that do not present an immediate hazard to the safety of the public or persons using the ride or device, or that may be temporarily corrected by restrictions in the operation of the ride or device, shall be noted as a restriction on the permit application, and the permit then issued. However, such defects must be corrected before the time of renewal of the permit. The operator shall notify the division when the corrections are completed by signing and delivering to the division the copy of the permit application provided for reporting corrections. Upon receipt of the inspection reports and certification that the ride or device complies with ORS 460.310 through 460.410 and these rules, receipt of a certificate of insurance from the insurer of the ride, and receipt of the required fees, the division shall issue a permit to operate the ride or device. The permit shall be attached to each amusement ride or device in a location accessible and clearly visible to persons who may wish to confirm the existence of the permit.

(2) The certificate of insurance required by section (1) of this rule, shall:

(a) Be an original on the standard form issued by the insurance carrier;

(b) Include the insurance policy number, the identifying name and, if available, the model and serial or other identifying number of the ride or device; and

(c) Include a statement that the insurance carrier will give the division 30 days prior notice before the insurance policy is canceled.

(3) Permits shall expire one year from the date of issue and renewal permits shall begin on the date of expiration of the expired permit. Within ninety days prior to expiration of an existing permit, an operator may apply on a division form to renew a permit to operate an amusement ride or device.

(4) The results of the inspection shall be recorded by the inspector on forms furnished by and filed with the division. A copy of the report shall also be provided to the operator.

(5) The division may make unscheduled inspections of previously inspected rides.

(6) Any inspector or representative of the division may issue, in writing, a stop order for any amusement ride or device determined to be hazardous or unsafe. Operation shall not resume until the unsafe conditions are corrected and a reinspection has been performed.

(7) The division may suspend or revoke a permit to operate for failure to conform to the minimum safety requirements contained in these rules or otherwise required by law. Proof of compliance with the requirements of the division for reinstatement shall be based on a reinspection.

(8) If the division proposes to suspend or revoke a permit to operate an amusement ride, it shall provide notice in accordance with ORS 183.415 of its proposed action and the basis for such action. If the operator desires a hearing, the operator shall so notify the division in writing, within 20 days. If the division suspends or refuses to renew a permit on an emergency basis as provided by ORS 183.430(2), the operator may request in writing a hearing within 90 days. If the division refuses to issue a permit on grounds other than failure to pass an inspection, the operator may request in writing a hearing within 60 days. For purposes of this section, the calculation of time for notification or receipt shall be:

(a) When mailed by the division, the date mailed plus two days;

(b) When mailed to the division, the date received by the division, less two days.

(9) Temporary renewal permits may be issued as authorized by ORS 460.330(3) upon written application to the division, and payment of the permit fee. Temporary permits shall be valid for 14 days. If the annual renewal permit is issued prior to expiration of the temporary permit, no additional fee shall be required.

(10) Any person failing to obtain the necessary permits required by this rule shall be subject to an investigative fee. The amount of the investigative fee shall be the average or actual additional cost of ensuring conformance with these rules and shall be in addition to the required permit fees.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.330 & 455.058
History:
BCD 15-2014, f. 12-31-14, cert. ef. 1-1-15
BCD 15-1998, f. 9-30-98, cert. ef. 1-1-99
BCD 10-1994, f. 4-25-94, cert. ef. 5-1-94
BCD 1-1994, f. 1-14-94, cert. ef. 2-1-94
DC 13-1982, f. 4-21-82, cert. ef. 4-30-82, Renumbered from 814-060-0100

918-200-0027
Temporary Operation of an Amusement Ride or Device Pending Issuance of an Operating Permit

(1) An amusement ride or device may be operated pending the issuance of an operating permit under the following conditions:

(a) The ride operator provides, and the division has received, information about the ride or device to include its nomenclature and serial number and whether the ride or device has previously been issued an Oregon operating permit;

(b) The ride operator provides, and the division has received, proof that the ride is insured in accordance with ORS 460.330 and OAR 918-200-0025(2);

(c) The ride operator makes, and the division has received, payment of the operating permit fees; and

(d) Once the ride is available for inspection, the ride is inspected and approved for operation by a ride inspector in accordance with OAR 918-200-0025(1) and a completed application for an operating permit and inspection report is transmitted to, and received by, the division.

(2) A ride or device may be operated for a period of up to 14 days pending the issuance of an operating permit, unless the division notifies the ride operator that no operating permit will be issued based on the information provided.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.330
History:
BCD 15-1998, f. 9-30-98, cert. ef. 1-1-99

918-200-0030
Division Inspectors

(1) The division administrator may appoint and employ qualified inspectors to inspect amusement rides for the division.

(2) The division shall maintain a list of inspectors who have notified the division that they are qualified pursuant to OAR 918-200-0095. Inspectors must renew this notification annually.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
BCD 15-1998, f. 9-30-98, cert. ef. 1-1-99
BCD 10-1994, f. 4-25-94, cert. ef. 5-1-94
BCD 1-1994, f. 1-14-94, cert. ef. 2-1-94
DC 13-1982, f. 4-21-82, cert. ef. 4-30-82, Renumbered from 814-060-0110

918-200-0040
Authority of Inspector

An inspector not employed by the Division may inspect only amusement rides and devices insured or to be insured by the inspector’s employer or principle.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
BCD 1-1994, f. 1-14-94, cert. ef. 2-1-94
DC 13-1982, f. 4-21-82, cert. ef. 4-30-82, Renumbered from 814-060-0120

918-200-0055
Permit Fee

(1) The fee for an annual operating permit for rides and devices shall be $25.

(2) The fee for reinspection by the Division shall be $60 per hour, including associated travel time.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
BCD 1-1994, f. 1-14-94, cert. ef. 2-1-94
BCA 6-1993, f. 4-28-93, cert. ef. 5-1-93
BCA 20-1992(Temp), f. 11-24-92, cert. ef. 12-1-92
DC 17-1982, f. & ef. 8-3-82, Renumbered from 814-060-0135
DC 13-1982, f. 4-21-82, cert. ef. 4-30-82

918-200-0065
Ski Equipment, Federal Exemptions

(1) Devices and equipment generally associated with winter sports activities, such as ski lifts, ski tows, J-bars, ski mobiles, chair lifts and aerial tramways, shall be installed and maintained in accordance with ANSI Standard B77.1-1992 published by the American National Standard Institute.

(2) The Division finds that the devices associated with winter sports activities located in ski areas that are operated over or upon land under the jurisdiction of the United States Forest Service have been, and are being regulated and inspected by the U.S. Forest Service. The inspection standards are, and have been, not lower than the safety standards required by ORS 460.355(1). So long as the U.S. Forest Service continues to regulate and inspect those devices located on or across Federal Forest Service land, they are exempt from the requirements of ORS 460.310 to 460.410.

[Publications: Publications referenced are available from the agency.]

Statutory/Other Authority: ORS 460.355 & 460.360
Statutes/Other Implemented: ORS 460.355
History:
BCD 15-1998, f. 9-30-98, cert. ef. 1-1-99
BCD 10-1994, f. 4-25-94, cert. ef. 5-1-94
BCA 26-1991, f. 8-26-91, cert. ef. 8-27-91
BCA 3-1991(Temp), f. & cert. ef. 2-25-91
DC 13-1982, f. 4-21-82, cert. ef. 4-30-82, Renumbered from 814-060-0150

918-200-0070
General Standards and Requirements

(1) All codes, standards, and publications adopted by reference in these rules are adopted pursuant to OAR 918-008-0000.
(2) Except for devices and equipment subject to OAR 918-200-0065, amusement rides and devices subject to inspection and permit under these rules shall be manufactured, installed and maintained according to American Society for Testing and Materials (ASTM) Standards and by the additional standards adopted in these rules.
(3) Effective April 1, 2015 the Oregon Amusement Ride and Device Specialty Code consists of the following:
(a) ASTM F1159 — 2011, Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures.
(b) ASTM F1193 — 2014, Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices.
(c) ASTM F1957 — 1999 (2011), Standard Test Method for Composite Foam Hardness — Durometer Hardness.
(d) ASTM F2007 – 2012, Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities.
(e) ASTM Standard F2137 – 2013, Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices.
(f) ASTM Standard F2291 – 2014, Standard Practice for Design of Amusement Rides and Devices.
(g) ASTM F2374 – 2010, Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices.
(h) ASTM F2375 – 2009, Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions.
(i) ASTM F2460 – 2011, Standard Practice for Special Requirements for Bumper Boats.
(j) ASTM F2959 – 2012, Standard Practice for Special Requirements for Aerial Adventure Courses.
(4) Daily Operating Inspection:
(a) Each amusement ride shall be given a daily operating inspection by the ride operator before any passenger is permitted to ride. Results of these daily inspections shall be recorded and kept on file by the operator for at least two years, and made available upon request by the division;
(b) A ride or device not properly assembled or defective or unsafe in any of its parts, controls, or safety equipment shall not be operated.
(5) Control of Operation:
(a) Every ride operator shall be trained in the use and function of all normal operating controls, signal systems and safety devices applicable to the ride or device and of the proper use, function, capacity and speed of the particular ride or device being operated. A ride operator shall be at the operating controls during operation and shall have complete control of the ride or device at all times the ride is operated for public use. When the ride or device is shut down the controls shall be locked or incapacitated to avoid unauthorized operation;
(b) Except for amusement devices designed to be operated or controlled by a passenger, only trained ride operators shall handle the controls during normal operation.
(6) A ride or device shall not be loaded beyond its rated capacity or operated at an unsafe speed or at any speed greater than that prescribed by the design engineer or manufacturer. When this information is not available, the operator shall develop criteria for safe operating speeds and rated capacity to the satisfaction of the division.
(7) An operator shall report by telephone to the division as soon as practicable, any accident that occurs from the operation of an amusement ride or device, and that results in death, serious injury or property damage in excess of $5,000. A written report shall be filed with the division within five working days following the accident. If the accident is a result of equipment failure, the device shall not be operated until it is inspected by an inspector authorized by these rules to inspect the device.
(8) Public Protection:
(a) An amusement device shall not be operated while any person is in a position to be in danger of harm or injury. Areas of potential danger shall be fenced, barricaded or otherwise guarded;
(b) Amusement rides and devices shall not be assembled, disassembled, or operated in a location that at any time may be nearer to energized overhead power lines than:
(A) For lines rated 600 volts or less, minimum clearance between the lines and any part of a lifting crane, ride structure, concession booth, building or equipment shall be 15 feet;
(B) For lines rated over 600 volts, minimum clearance between the lines and the lifting crane, ride, structure, concession booth, building or equipment shall be 15 feet.
(c) Internal Combustion Power Sources:
(A) Internal combustion power sources shall be of adequate type, design and capacity to handle the design load;
(B) Fuel tanks should be of adequate capacity to permit uninterrupted operation during normal operating hours. Where it is impossible to provide tanks of proper capacity for a complete day, the ride or device shall be shut down and unloaded or evacuated during the refueling procedure. The fuel supply shall not be replenished while the engines are running;
(C) An enclosed area in which an internal combustion engine is operated shall be ventilated. Exhaust fumes shall be discharged outside the area. The equipment shall be properly grounded;
(D) Internal combustion power sources shall be located in a manner permitting proper maintenance and be protected by guards, fencing or enclosure to prevent exposure to hazard and to secure the equipment from the public;
(E) The operator shall provide and maintain portable fire extinguishers of the classification, capacity and number prescribed by the State Fire Marshal;
(F) Liquid petroleum gas employed either as fuel for internal combustion engines, for heat, or for illumination shall be stored in a manner approved by the State Fire Marshal;
(G) All flammable liquids shall be stored and handled according to State Fire Marshal standards. Bulk storage in quantities above 60 gallons shall not be in the area accessible to the public.
(d) Interior and exterior parts with which passengers may come in contact shall be smooth, rounded, free from sharp, rough or splintered edges or corners, and with no protruding screws or projections which might cause injury. Parts upon or against which passengers might be thrown by action of the ride shall be adequately padded to prevent or minimize the possibility of injury.
(9) Electrical Standards:
(a) Code. Permanent electrical conductors and equipment installed on or around permanent and temporary amusement parks, carnivals, amusement rides or devices shall conform to the Oregon Electrical Specialty Code. Temporary electrical conductors and equipment, and permanent conductors and equipment within permanent rides and devices shall conform to manufacturers’ specifications. Electrical equipment and wiring methods in or on rides, concessions or other units shall be provided with mechanical protection where such equipment or wiring methods are subject to physical damage;
(b) Portable Power Outlets and Terminal Boxes. Boxes shall be designed so that no live parts are exposed to accidental contact. Where installed outdoors, the box shall be of weatherproof construction and mounted so that the bottom of the enclosure is not less than six inches above the ground. Boxes shall be kept locked where located in an area accessible to the general public. Receptacles of the grounding type shall have overcurrent protection. Service power shall be connected to the box by receptacles mounted on the exterior walls with safety grounding. Receptacles of the grounding type shall have overcurrent protection within the box. The overcurrent protection shall not exceed the ampere rating of the receptacle, except as permitted for motors. Branch circuits shall include means for equipment grounding and shall connect to receptacles mounted on the box. Exterior openings shall be provided with protective covers, draining eaves or canvas. Conductors fed directly through an opening on the wall of the box shall be color-coded, properly sized, and provided with strain relief. Fuses or breakers shall be secured solidly and all connections within the boxes are to be made with threaded screws and lugs of the proper size. Busbars shall have an ampere rating not less than the overcurrent device supplying the box. Where conductors terminate directly on busbars, busbar connectors shall be provided;
(c) Wiring Methods. Flexible cords and cables shall be permitted for temporary installations provided they are listed for extra hard usage, wet location and be sunlight resistant. Flexible cords and cables supplying power to the disconnecting means of a ride or device shall not be smaller than #10 AWG (American Wire Gauge) and shall contain an equipment-grounding conductor. Metal enclosures of electric equipment and metal frames and metal parts of rides, concessions, trailers, trucks or other equipment that support or contain electrical equipment shall be grounded and bonded to the same source. Single conductor cable shall be permitted only in sizes #2 and larger. Open conductors are prohibited except as part of a listed assembly or for festoon lighting. Flexible cords and cables shall be continuous without splice or taps between boxes or fittings. A box or fitting shall be installed at each connection point, outlet, switchpoint or junction point. Flexible cords or cables run on the ground, where accessible to the public, shall be covered with nonconductive mats. Cables and mats shall be arranged so as not to present a tripping hazard. Cord connectors shall not be laid on the ground in areas traversed by the public. Flexible cords and cables shall be protected from overcurrent at their source of supply;
(d) Disconnecting Means. Each ride and concession shall be provided with a fused disconnect switch or circuit breaker located in an area readily accessible from the operator’s station. The disconnecting means shall be readily accessible to the operator, including when the ride is in operation. Where accessible to unqualified persons, the enclosure for the switch or circuit breaker shall be of the lockable type. A shunt trip device that opens the fused disconnect or circuit breaker when a switch located in the ride operator’s console is closed shall be a permissible method of opening the circuit.
(e) Power Sources. Electrical power sources shall be located to permit proper maintenance and protected by guards, fencing or enclosures to prevent exposure to the public;
(f) An amusement ride or device constructed before October 1, 1996, which has been issued an operating permit by the Division within the last three years, may be maintained using previously approved electrical materials and methods until the ride or device is rebuilt, subject to major electrical alteration. All other rides or devices without manufacturers’ information shall conform to the Oregon Electrical Specialty Code in effect on the date the ride or device was first approved for an operating permit in Oregon.
(10) Stairways, Landings and Ramps.
(a) Safe and adequate means of access to and from amusement rides and devices shall be provided. All passenger ways shall be free from debris, obstruction, projection and other hazards. All floor, ramp and step surfaces shall be constructed and maintained to prevent slipping and tripping. A safe clearance shall be maintained from all mechanical handling equipment;
(b) Adequate stairways or ramps and necessary landings and platforms shall be provided where persons enter or leave a device, ride or structure that is above or below grade or floor level at the entrance to and exit from such. Unless provided by a recognized manufacturer as a part of the amusement ride or device, the design and construction of stairways, ramps, railings and exits shall conform to the Oregon Structural Specialty Code in effect at the time of manufacture. All stairs with more than three risers shall have handrails or railings on both sides regardless of width;
(c) Stairways, landings and ramps shall be designed, constructed and maintained in accordance with the Oregon Structural Specialty Code in effect at the time the ride or device was first issued an operating permit, but so as to sustain safely a live load of at least 90 pounds per square foot;
(d) At least two exits remote from each other shall be provided from each level floor, tier, room or balcony. An entrance may serve as an exit for the purposes of compliance with this rule. All exits shall conform to the Oregon Structural Specialty Code in effect at the time the amusement ride or device was first issued an operating permit in Oregon, but in no case shall be less than 28 inches wide;
(e) Access to and exits from amusement rides and devices and associated structures shall be provided with illumination by natural or artificial means of at least five foot-candles measured at grade level.
(11) Housekeeping:
(a) Cleanliness. A suitable number of containers for refuse shall be provided in and around all amusement rides and devices and associated structures. Excessive accumulations of trash or rubbish shall be promptly removed. All parts of amusement rides or devices and associated structures used by the public shall be kept clean. The area shall be clear and kept free from trash and tripping hazards;
(b) Air Compressors and Equipment. Air compressors, air compressor tanks and related equipment shall be constructed, equipped and maintained to insure safe operation at all times. Air compressor tanks and other air receivers used with air compressors shall be operated and maintained in compliance with applicable provisions of ORS 480.510 through 480.665 and the rules adopted by the Oregon Board of Boiler Rules;
(c) Oil and Hydraulic Systems. Oil and hydraulic systems and other related equipment used in connection with amusement devices shall be free of leaks and shall be maintained to insure safe operation at all times;
(d) Machinery and Machine Guarding. Machinery used in or with an amusement device shall be enclosed, barricaded or otherwise effectively guarded against contact. Guards removed for maintenance shall be replaced before normal operation is resumed. One or more methods of machine guarding shall be provided to protect the public from injury. Guards shall be fixed to the machine where possible and secured elsewhere if attachment to the machine is not possible. The guard or barrier shall not offer an accident hazard in itself. Barriers shall be secured to prevent movement or tip over. The barriers shall be located to keep the public at a safe distance from the ride. All machinery designed for a fixed location shall be secured;
(e) Mechanical Power Transmission. All power transmission devices and associated moving parts shall be shielded, enclosed or barricaded to protect the public or shall be sufficiently distant to prevent hazard;
(f) Welding, Cutting and Brazing. Welding, cutting or brazing shall not be performed where the public can directly observe the process or be hit by sparks of flying materials. Any welding, cutting and brazing performed when the public is present shall be behind temporary solid barriers.
 

[Publications: Publications referenced are available from the agency.]

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
BCD 3-2024, amend filed 03/28/2024, effective 04/01/2024
BCD 15-2014, f. 12-31-14, cert. ef. 1-1-15
BCD 15-1998, f. 9-30-98, cert. ef. 1-1-99
BCD 10-1994, f. 4-25-94, cert. ef. 5-1-94
DC 13-1982, f. 4-21-82, cert. ef. 4-30-82, Renumbered from 814-060-0200

918-200-0095
Inspectors, Files and Information

(1) Scope. This rule establishes the minimum standards for inspectors, for communication between manufacturers, operators and inspectors, and the required retention of information.

(2) To be qualified to inspect amusement rides in Oregon, inspectors shall have:

(a) Two years experience with an insurance company as an amusement ride inspector;

(b) Two years experience inspecting amusement rides inspecting amusement ride codes while employed by a state or governmental body regulating amusement rides;

(c) Five years field operating and maintenance experience with amusement rides and devices, including responsibility for erection, assembly, disassembly; personnel supervision responsibility for erection, maintenance and operating functions;

(d) Ten years documented practical experience in the design, construction, maintenance, repair, field inspection, and operation of amusement rides and devices as an authorized representative of a recognized manufacturer; or

(e) An equivalent combination of training and experience.

(3) Every inspector shall annually attend at least eight hours of continuing education related to amusement rides and devices sponsored by the Amusement Industry Manufacturers and Suppliers or its equivalent. All experience and schooling shall be documented and available to the Division upon request.

(4) Manufacturers’ Registries. Manufacturers shall, insofar as reasonably practical, maintain registries of persons in the State of Oregon who have need for information on the amusement rides and devices which they manufacture:

(a) Operator Registry. This registry shall contain names of all persons known to the manufacturer to operate the manufacturer’s products within Oregon;

(b) Other Than Operator Registry. This registry shall contain names of all persons within this state who have notified the manufacturer of their legitimate need for information on the manufacturer’s products;

(c) Manufacturers may periodically request, via ordinary U.S. mail, that persons on the registries confirm the need for the new information. A manufacturer may remove from the mailing list the names of persons who fail to respond within 60 days;

(d) Ride manufacturers shall notify registrants of all new information relevant to the proper maintenance, operation and inspection of the amusement rides and devices they manufacture.

(5) Ride Files. Operator shall maintain a file for each ride. Records should be kept at least five years, except as otherwise specifically stated in statute or rule. The file shall include:

(a) Record of required permit inspections; and

(b) Correspondence related to the manufacturer, including:

(A) Bulletins and other manufacturing information; and

(B) Records indicating modifications recommended by the manufacturer were made.

(c) The operating instructions;

(d) All technical information supplied by the manufacturer; and

(6) Such other information as required by these rules.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
BCD 15-1998, f. 9-30-98, cert. ef. 1-1-99
BCD 10-1994, f. 4-25-94, cert. ef. 5-1-94
DC 13-1982, f. 4-21-82, cert. ef. 4-30-82, Renumbered from 814-060-0500

918-200-0100
Bungee Jumping

Except for jumps from towers or devices specifically engineered and designed for reverse jumping or catapulting, “bungee catapulting,” “negative jumping,” “reverse jumping,” “launching,” “tandem, double or multiple jumping,” or “sandbagging” shall not be permitted.

Statutory/Other Authority: ORS 460.355
Statutes/Other Implemented: ORS 460.355
History:
BCD 15-2014, f. 12-31-14, cert. ef. 1-1-15
BCD 10-1994, f. 4-25-94, cert. ef. 5-1-94